Working Advice
- Only the centre of the laser line must be used for marking. The width of the laser line changes depending on the distance.
The laser target plate (13) improves visibility of the laser beam in unfavourable conditions and at greater distances.
The reflective surface of the laser target plate (13) improves visibility of the laser line. The transparent surface enables the laser line to be seen from behind the laser target plate.
A tripod offers a stable, height-adjustable support surface for measuring. Place the measuring tool with the 1/4" tripod mount (1) on the thread of the tripod (16) or a conventional camera tripod. Tighten the measuring tool using the locking screw of the tripod.
Roughly align the tripod before switching on the measuring tool.
The laser goggles filter out ambient light. This makes the light of the laser appear brighter to the eye.
- Do not use the laser goggles (accessory) as protective goggles. The laser goggles make the laser beam easier to see; they do not protect you against laser radiation.
- Do not use the laser goggles (accessory) as sunglasses or while driving. The laser goggles do not provide full UV protection and impair your ability to see colours.