GDR 18V-215 Professional
Cordless Impact Driver
Your Go-To tool for fast and accurate screwdriving
- Fast and efficient, also for long screws and hard wood thanks to 3,300 RPM and 215 Nm torque
- Easily handles tight spaces thanks to cordless compact design
- Good quality finish due to two Auto Driving Modes that come with Automatic shut down & Auto slow functions
Functions & key features
GDR 18V-215 Professional
Your Selection
Order number: 0 601 9N2 0L0
Included in this variant
-
Belt Clip
Technical data
Additional data |
|
|---|---|
| Battery voltage | 18.0 V |
| Torque, max. | 215 Nm |
| Tool holder | 1/4" internal hexagon |
| No-load speed | 0-2,100 rpm |
| Weight incl. battery | 1.37 kg |
| No-load speed (1st level) | 0-2,100 rpm |
| No-load speed (2nd level) | 0-3,300 rpm |
| Torque settings | 2 |
| Weight excl. battery | 1 kg |
| Impact rate | 0-3,800 bpm |
| Impact rate (1st level) | 0-3,000 bpm |
| Impact rate (2nd level) | 0-3,800 bpm |
| BITURBO | No |
The A-rated noise level of the power tool is typically as follows: Sound pressure level 100 dB(A); Sound power level 108 dB(A). Uncertainty K= 3 dB.
* You can find more information about the deviations in the following link:
GDR 18V-215 Professional: Further information
Product Highlights
When your job involves driving in vast numbers of screws every day, you need a tool that gets the job done fast and accurately. With the GDR 18V-125 Professional, you get a tool that swiftly drives screws through wood or metal at 3,300 RPM. And with a torque of 215 Nm, it easily handles screw-driving into hard wood. It’s ideal for hard-to-access tight spaces thanks to its compact design. And there’s no risk of your work being anything less than perfect. The tool has 2 auto driving modes for metal and wood for screws with a head length of 121 mm (or 126 mm, depending on the selected model). It can also stop automatically or slow down when it reaches the surface of your material, so you get a good quality finishing. Plus, it is versatile and convenient thanks to its dual shank bit holder that can hold both NZ and MZ bit types (only applies to certain models).
Equipment & Application
The GDR 18V-215 Professional is ideal for wood and metal based materials. If you are working wiht wood, it easily drives 50mm screws and long screws of 80-140mm into wood frames. It is great with metal too, it drives self-driving screws into sheet metal of 3mm, M8 machine screw into pre-threaded metal blocks, self-tapping screws into sheet metal of less than 3mm. It also tigthen and loosen nuts less than M10
